JK Steel Partition Framing System

JK Steel metal profiles are produced with an innovative & Patent Applied

Serration process which produces a unique serrated pattern across the surface of the material; Which results in :

  • Increased Surface Area (8% more than plain sheet)
  • Doubled Surface Thickness (than plain sheet)
  • Stronger Surface due to work hardening

Increased load carrying capacity (10% higher than Knurled Sections)

All components in JK Steel Partition Framing System are with Al-Zn coating of 150 gsm which provides superior corrosion resistance ( upto 5 times than Zn 120 gsm)

Floor and Ceiling Channel

Application

Fixed to floor and ceiling for securing

JK Steel   wall studs

Dimensions in (mm)

50 x 32 x 32 x 3660
94 x 32 x 32 x 3660
72 x 32 x 32 x 3660
148 x 32 x 32 x 3660

‘C’ Stud

Application

Used the vertical supporting wall framing

Dimensions in (mm)

48 x 34 x 36 x 3050/3660
92 x 34 x 36 x 3050/3660
70 x 34 x 36 x 3050/3660
146 x 34 x 36 x 3050/3660

AcouStud

Application

Used as the vertical support in wall framing. This is a specialist stud which will give high acoustic performance

Dimensions in (mm)

70 x 41 x 44 x 3050/3660
146 x 41 x 44 x 3050/3660
92 x 41 x 44 x 3050/3660

Noggin Channel

Application

Used for horizontal support

Dimensions in (mm)

48 x 40 x 0.5 x 390/492/695
92 x 40 x 0.5 x 390/492/695
70 x 40 x 0.5 x 390/492/695
Length: 695/492/390

I Stud

Application

For shaftwall

Dimensions in (mm)

48 x 38 x 3050/3660
92 x 38 x 3050/3660
70 x 38 x 3050/3660
146 x 38 x 3050/3660

 

Metal Thickness: 0.5mm (48mm stud), 0.7mm (70/92/146 mm studs), 0.9mm (92/146 mm studs) Retaining channel and starter channel of suitable sizes are also available for fixing of I Stud